i-4 apem www.apem.com i b series 15a and 25a terminal posts materials ?shaft : brass, nickel plated ?insulated nut : abs molding over brass ?ther insulated parts : phenolic resin or melamine electrical specifications ?dielectric strength : 15a type : 3.000 vrms 50 hz min. between shaft and panel 25a type : 4.000 vrms 50 hz min. between shaft and panel ?short overload (< 2mn) : 50 % with cable lug general specifications ?terminal connection by : - plug 4 mm (.157) - solder lug terminals, - wire lead ?operating temperature : -40? to +70? packaging unit : 100 pieces or multiple per type and colour. dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
apem www.apem.com i-5 i b series 15a and 25a terminal posts non-insulated terminal posts 25a insulated terminal posts 25a non-insulated terminal posts 15a insulated terminal posts 15a b1 black B11 red b12 green b13 blue b14 white b15 y ellow b16 green / yellow b19 orange b2 black b21 red b22 green b23 blue b24 white b25 y ellow b26 green / yellow b29 orange b3 black b31 red b32 green b33 blue b34 white b35 y ellow b36 green / yellow b39 orange b4 black b41 red b42 green b43 blue b44 white b45 y ellow b46 green / yellow b49 orange (.649) (.157) (1.082) (.708) (.157dia) (.511dia) (.078dia) (.157diax0.70) 60? (.397) (.322dia) 18.00 27.50 16.50 4.00 10.10 4.00x0.70 2.00 13.00 4.00 8.20 3.50 (.137) (.078dia) 2.00 4.00 4.00 16.50 27.50 18.00 (.157dia) (.708) (1.082) (.157) (.649) 13.00 (.511dia) 2.00 4.00x0.70 (.157diax0.70) (.078dia) (.354) 9.00 (.165dia) 4.20 (.078dia) 2.00 (.807) (.275) (1.377) (.925) (.137) (.098) (.157dia) 4.00 (.629dia) 60? (.49) 2.50 16.00 (.401dia) (.236diax1.00) 12.45 10.20 35.00 20.50 7.00 23.50 3.50 6.00x1.00 si (.098dia) 2.50 23.50 7.00 20.50 35.00 (.925) (1.377) (.275) (.807) 16.00 (.629dia) 4.00 (.157dia) 2.50 (.098) 6.00x1.00 (.236diax1.00) (.244dia) 6.20 (.098dia) 2.50
|